The Shelf Factory
Wood Shelf Brackets and Custom Corbels
This page is to show some of the Custom Brackets and Corbels have been made for other customers. I can take any of the brackets I make and put full frames or backplates on them for different uses. If you would like something similar to what you see on this page or maybe some other style of Specialty bracket made, Please let me know. Describe what you are needing and send me an email. I will answer promptly as to what could be made for you.
Above are two Custom-made Oversize Colonial Shelf Corbels measuring 16” depth x 16” height attached to a 3 1/2" wide backplate with 3 countersunk holes inserted on each side of the bracket complete with supplied buttons to cover after installation, These were to be used on a laundry shelf but could be used for many other purposes.
Above are 6 Custom Triangulated Style Corbels measuring 10" depth & 10" height, with 3 1/2" width backplate. All parts were 7/8" thick SYP with 2 countersunk holes with supplied buttons to cover on each side of the backplate.
Above are custom triangular wood corbels that I have made for customers. I can custom-make them in a size you want.
Above is a pair of Custom Scroll Closet Brackets that I have made for quite a few customers over the years. I originally made and designed them as a Custom order for a customer in Tennesee and have reproduced it many times since showing it on this website. They measured 15 1/2" by 15 1/2" for 1 1/4" closet pole. A 16" to 20" deep shelf can be put on top of these brackets.
Click here to view what I made for the original customer.
Above is a picture of a Custom Cottage Style Wood Shelf Bracket I made that are a slight variation of our cottage style brackets. These were originally made for a customer to use for support of her Granite Countertops in her kitchen. I have also made several orders of these in different sizes since I first showed the picture above.
Please E-mail me at
to order and for inquiries!
I will respond quickly!